How many times do you change your clothes in the course of the day? Two? Three? Oven? I tried this on myself recently. When I wake up, I put on my robe and flannel sleep pants, that’s one. After a morning shower, I put on whatever clothes are appropriate for the day, whether it’s going out to meetings or being in front of the computer all day, that’s two. As the day winds down, I can switch to “yard work” mode, take a walk, or do some kind of exercise, which requires another change, that’s three.
Then, before dinner, another quick change into something comfortable for the evening, usually sweatpants and a sweater – that’s four. Add a night for dining and you get one more change – that’s five! Changing your clothes five times in the course of a day may, on the surface, seem a bit excessive, but the truth is that each change attracts a specific and distinct purpose. You wouldn’t wear your robe and flannel pants to a business meeting; and your business meeting attire might not be the best choice for lounging around the house at night.
An electric guitar is much the same. He has the ability to “change his clothes” by using a selector switch. And as in the example above, each change, or setting, can have a specific and distinct tonal purpose.
To understand the tonal options available with a pickup selector switch on an electric guitar, it is first necessary to understand how the switch works and why.
The Pickup Selector Switch is connected to the pickups on the guitar and gives the guitarist the ability to choose various combinations of pickups at any given time. Each combination of pickups produces a different tone that the guitarist may want to use for the particular song he is playing.
Although there are many types of pickup selector switches on a wide variety of electric guitars, a good understanding of the subject can be gained by taking a closer look at two of the most common guitar models on the market. These are the Gibson Les Paul and the Fender Stratocaster. Each of these two legendary guitar models has its own legion of loyal fans who champion the merits of one over the other. Many guitarists see the tonal importance of each and insist on having both available for any situation. . In addition, there are countless guitar manufacturers that produce guitars that emulate one or the other of these two famous models.
The differences between the Stratocaster and the Les Paul are many and literally the subject of another discussion, so let’s take a look at the differences in pickup selector switches between the two.
The standard “Les Paul” type guitar is usually built with a two “humbucker” pickup configuration. In this configuration there is a “neck” pickup and a “bridge” pickup. A neck pickup is, as the name implies, the pickup that sits closest to the neck or fingerboard of the guitar. The neck produces a “darker” “full body” tone. The bridge pickup is, also as its name implies, the pickup that sits closest to the guitar’s bridge and produces a “brighter” or “thinner” tone. The selector switch on a Les Paul-style guitar is normally a three-way or “three-way” switch. The three combinations of pickup selections available with the three-position switch are as follows:
Position 1 – Activates only the neck pickup
Position 2 – Activate only the bridge pickup
Position 3 – This middle switch position activates a combination of the two pickups
The standard “Stratocaster” style guitar is typically built with a three “single coil” pickup configuration.
In this configuration there is also a neck pickup and a bridge pickup, but there is also a middle pickup.
The selector switch on a Stratocaster-style guitar is normally a five-way or “five-way” switch. The combinations of pickup selections available with the five-position switch are as follows:
Position 1 – Switch in the downmost position activates only the bridge pickup
Position 2 – The following position activates a combination of the bridge and middle pickups
Position 3 – This middle position activates only the center pickup by itself
position 4 – This position activates a combination of the neck and middle pickups
position 5 – This position activates only the neck pickup
A good trick on the Strat-style pickup selector switch is to put the switch in the “middle” position. It’s a little hard to find, but by setting the switch “between” positions 1 and 2, or positions 4 and 5, you can get an extra couple of “out of phase” tones. This is a technique made famous by Jimi Hendrix and essentially turns a five-way switch into a seven-way selector!
Whether playing a Les Paul-style, Strat-style, or one of the many other models on the market, the pickup selector switch gives the player the ability to tonally “change clothes” on the fly. Which selector position should I use? It depends. It is really a matter of personal interpretation. Different songs call for different tones, and many times you’ll use different combinations of pickups within the same song. The key is to play around with all the shades available to you and find the one that works best for you.
Some players get stuck in a rut and are comfortable keeping the pickup selector in the same position all the time. Don’t let it be you. Always be mindful of the tonal “change of clothes” available to you at the flick of a switch, and keep your playing fresh and interesting by “getting into something more comfortable” or “dressing up” when you feel like it. strikes!