One of the most confusing and perhaps distressing errors that the PlayStation 3 can display is beeping 3 times and then shutting off. In most cases the unit will not turn on properly and this leaves many wondering how to fix PS3 beeps. To fix PS3 beeps, you need to find out what is going wrong with the system to cause this.
Since the PlayStation 3 relies on error codes via the LED and beep codes via the built-in speaker, a system that won’t boot can be difficult to troubleshoot. You can’t fix PS3 beeps by checking the OS or restoring it if you can’t get it to stay up long enough to get there. In most cases, the only way to fix PS3 beeps of this nature is to do some serious work.
how to fix
First you need to check the connections from the console to the power outlet and to the TV. It is recommended to always connect your game console to a surge protector to keep it safe. A power surge can damage the PlayStation 3 and be the source of this problem in some cases. Once you’ve verified the connections, manually power off the drive via the built-in switch on the back, unplug all cables, and then remove the hard drive.
After waiting ten minutes, plug the wires back in, flip the switch, and see if that resolves your issue. If not, then you need to take drastic measures to fix PS3 beeps. The reason you would perform the above procedure is to essentially give the console a hard reset similar to a PC. If this doesn’t fix PS3 beeps, your problem is most likely hardware related.
If you have a warranty right now would be the best time to use it, if you don’t then you have nothing to lose. To determine which piece of hardware is causing the problem, you need to remove or replace certain components. It can be destructive to fix PS3 beeps this way, but it is the last resort. If the system tries to boot then your power supply is fine, if it doesn’t even go that far you may want to replace your power supply to fix PS3 beeping.
Make sure you find the correct model for your particular PS3. However, if your power is fine, then you need to unmount the case and remove the Blu Ray drive, then carefully power the drive back on and see if that fixes the problem. If this doesn’t work, you most likely have a heat problem. Removing the heat sink and reapplying thermal grease to both the chips and the heat sink may fix the problem.
This involves completely disassembling the console. Once the console has successfully remounted, try again. If the problem is not resolved, you have a faulty temperature sensor. This can be replaced if you have the time, skills, and patience. However, it might be easier to just buy a new console.
To fix PS3 beeping, you need to approach your PS3 with caution. Playing mindlessly can be dangerous for both you and the console. If you fix PS3 beeps through any of these methods, be proud of what you’ve done. If not, don’t feel bad, after all, technology isn’t perfect.